
Add to Cart
15/17 Outdoors High Pressure Stationary Type Ring Network Cabinet
Product overview
Overview fixed AC metal closed switchgear (ring network cabinet) is a rated voltage of 12kv.The AC high voltage electrical device with a rated frequency of 50Hz is mainly used for three-phase AC ring network, terminal distribution network and industrial electrical equipment, playing the acceptance and distribution of electricity and other functions, which is also suitable for equipment with out-in-box substation.
Main technical parameters
No. | Name | Unit | FN12-10 | FZN25-12 | |
1 | Fuses are rated for the current current | A | 100 | ||
2 | Rated transfer current | A | 1500 | 2000 | |
3 | Composite apparatus | Rated short-circuit-off current | kA | 1500 Ground and alternate 75; isolation break 85 | |
4 | 31. 5 | ||||
5 | mechanical life | 次 | 2000 | 1000 | |
6 | Auxiliary circuit is 1min | kV | 2 | ||
7 | Operating voltage of the electric operating mechanism | V | AC / DC 220; 110 | ||
8 | Levels of protection | IP2X | |||
9 | Outline size (wide x deep x high) | mm | 650 (850) X900X2000 (2200) |
Main technical parameters of the vacuum circuit breaker
No. | Name | Unit | FN12-10 | FZN25-12 | |
1 | R+ated voltage | N | 12 | ||
2 | The 1min working frequency withstand voltage | N V |
Ground to ground 42; isolation break 48 | ||
3 | Lightning impact voltage (peak) | kV | Ground to ground and alternate 75; isolation break 85 | ||
4 | Rated frequency | Hz | 50 | ||
5 | Main bus rated current | A | 630 | ||
6 | Load switch | rated current | A | 630 | |
7 | Power life at the rated current | KVA | No less than 100 | ||
8 | Disconnect the no-load transformer capacity | KA/S | 1250 | ||
9 | Rated heat-stable current | KA | 20/4;earth switch 20/2 | ||
1 0 |
Rated stable current (peak) | KA | 50 | ||
1 1 |
Rated short-circuit turn-off current (peak) | 次 | 50 |
Use Environmental Conditions:
(1) Normal Environmental Conditions
When the special working conditions are used beyond the prescribed normal environmental conditions, the user and the manufacturer shall negotiate.
Qualification: